UNO-1483G

Industrial Fanless DIN-Rail Controller with 4 x GbE, 3 x mPCIe, 1 PCIe, DP/VGA , 8 DI/O
  • 4th Generation Intel® Core™ i3 Processors up to 1.7GHz with 8GB DDR3L Memory
  • 4 x GbE, 4 x USB 2.0/3.0, 1 x RS-232, 2 x RS-422/485, 1 x VGA, 1 x DP, Audio
  • Compact with Fanless Design
  • Supports PCIe card, PoE iDoor module and Digital I/O for Machine Motion/ Vision application
  • Dual Power Input and Remote Power Button for reducing power down time and remote power control
  • 4G/ 3G/GPS/GPRS/WiFi Communication by iDoor Technology
  • Supports MRAM by iDoor Technology
  • Chassis Grounding Protection
  • Hot-Swap RTC battery with easily access at top side
  • Supports Fieldbus Protocol by iDoor Technology
Indent
Get Quote

Introduction

The UNO-1483G is an Intel 4th generation Core i3 DIN-Rail controller. This controller featured with dual power input that shorten the down time to enhance operation excellence. The general purpose input/output ports also help machine builder integrate direct control of start/stop inspection and indicate inspection results. UNO-1483G also equipped with PCIe slot and Advantech iDoor technology that extend this product to motion controller, like motion control card, or isolation control unit from iDoor modules. In companion these features, UNO-1483G featured with 4 gigabyte LAN, 2 USB 3.0, 3 COM, DP, VGA can support essential link for upstream and downstream, for example, PoE connected to IP camera from iDoor.

Specification

 

UNO-1483G-434AE
Digital I/O 4-ch digital input Wet/dry contact with Isolation Protection 2,500 VDC
4-ch digital output Compatible 5 V/TTL, Capable Sink: 24 mA max. per channel
Environment Operating Temperature -20 ~ 60°C (-4 ~ 140°F) @ 5 ~ 85% RH with 0.7m/s airflow
Relative Humidity 10 ~ 95% @ 40°C non-condensing
Shock Protection Operating, IEC 60068-2-64, 1Grms, random, 5 ~ 500Hz, 1 hr/axis
I/O Interface Audio Line-out
Grounding Protection Chassis Grounding
Power Connector 1x 7 Pins, Terminal Block to support dual power input and remote power control
Displays 1x VGA, supports 1920×1200@60Hz 24bpp, 1x DP 1.2, supports 1920×1080@60Hz 24bpp
LAN Ports 4x RJ45, 10/100/1000 Mbps IEEE 802.3u 1000Base-T Fast Ethernet, support Jumbo Frame
USB Port 4 x USB Ports (2 x USB2.0, 2 x USB3.0 compliant)
Serial Ports 1x RS-232, DB9, 50~115.2kbps, 1x RS-485, DB9, auto flow control, 50~115.2kbps
System Hardware Expansion 2 x Full-size mPCIe slot, mPCIe 2.0 (1 supports mSATA/SIM card), 1 x Half-size mPCIe slot w/o USB signal, 1x PCIe slot with x1 signal
Storage One drive bay for SATA 2.5″ HDD (Compatible with 9.5mm height HDD) (Optional), CFast drive by iDoor Technology (Optional)
Ethernet Intel® i210-IT GbE/ Intel® i218-LM GbE
Graphics Engine Intel® HD Graphics 4400
LED Indicators LEDs for Power, battery, LAN (Active, Status), Tx/Rx and HDD
Memory On-board 8GB DDR3L 1333/1600 MHz
Processor Intel® 4th Gen. Core™ i3-4010U ULT 1.7GHz Haswell Dual Core, 3MB L2 Core i7-4650U/i5-4300U/Celeron 2980U by project
General Certifications CE, FCC, UL, CCC, BSMI
Dimensions ( W x D x H ) 106 x 139 x 198 mm (4.2″ x 5.8″ x 7.8″)
Enclosure Aluminum Housing
Form factor Regular Size
Mounting DIN-rail, Wallmount
OS Support Microsoft® Windows 7/8, WES7/WE8S, Linux
Power Consumption 41W (Typical), 60W(Max)
Power Requirement 12V/24VDC ± 20%
Weight (Net) 2.4kg (5.3lbs)
System Hardware BIOS AMI UEFI 128Mbit Flash BIOS
System Chip Integrated Intel 8 Series Chipset
Watchdog Timer Programmable 6 levels timer interval, from 15 to 255 sec