ADAM-6541/ST

10/100Base-TX Ethernet to 100Base-FX Multi-mode ST Type Fiber Optic Converter
  • Supports full/half duplex flow control
  • Supports Integrated Loop-up engine
  • Supports MDI/MDI-X auto crossover
  • Provides broadcast storm protection
  • Supports +10 ~ 30 VDC voltage power input
  • Provides surge protection (EFT) 3,000 VDC for power line
  • Provides flexible mounting: DIN-rail, panel, piggyback
  • Supports operating temperatures from -10 ~ 65° C
  • Embedded a switch controller-supports auto-negotiation
  • Embedded a memory buffer-supports store and forward transmission
Indent
Get Quote

Introduction

ADAM-6541/ST is an industrial-grade converter designed to convert Ethernet networks to fiber networks. It does so by transparently converting Ethernet signals to optic signals. The advantages of fiber optics are wide bandwidth, EMI immunity and long-distance transmission capability. Therefore, ADAM-6541/ST are ideal solution for “fiber to building” applications at central offices or local sites. ADAM-6541/ST supports MDI/MDIX auto detection, so you don’t need to use crossover wires. It also includes a switch controller that can sense the transmission speed (10/100 Mbps) automatically. Both the Ethernet port and the fiber port have memory buffers that support store-and-forward mechanisms. This assures data cane be transmitted properly. ADAM-6541/ST is extremely compact and can be mounted in three different ways: DIN-rail, panel and piggyback. ADAM-6541 and ADAM-6542 can operate from -10 ~ 65° C and accept a wide voltage range from +10 ~ 30 VDC. Besides, it also provides 3,000VDC surge protection (EFT) against over-voltage so it is suitable for harsh operating environments.

Specification

Part Number ADAM-6541/ST-AE
General Ethernet Connectors 1 x ST type fiber connector
Mounting IP30,
ABS+PC with solid
mounting kits
I/O Transmission Distance Ethernet: Up to 100 m
Fiber:Multi-mode: Up to 2 km
Single-mode: Up to 20km
Transmission Speed UP to 100 Mbps
Operating System Operating Temperature 0 ~ 60°C (32 ~ 140°F)
Stack: 0~ 50°C (32 ~ 122°F)
Power Supply Power Connector 2-pin removable
screw terminal
Power Input 1 x Unregulated
10 ~ 30 VDC