ADAM-6160EI
6-ch Relay Output EtherNet/IP Module
- EtherNet/IP protocol
- 6-ch Form C relay output
- Breakdown voltage: 500 VAC (50/60 Hz)
- 2 x RJ-45 LAN (daisy chain)
- Contact Rating: 5 A @ 250 VAC; 5 A @ 30 VDC
Indent
Get Quote
Introduction
Advantech’s ADAM-6100 series is a new line of Industrial Ethernet Remote I/O modules. Designed with 2,500 VDC isolation protections, ADAM-6160EI, 6-ch relay output EtherNet/IP module, is very resistant to field interference. It is also equipped with the EtherNet/IP protocol, and allows daisy chain connections, making it possible to transfer data much faster during process control and other industrial automation applications. Daisy chain connectivity provides a more scalable system with fewer wires to help avoid interference common in factory settings. More importantly, Advantech’s ADAM.NET Utility comes bundled with each ADAM-6100 module, allowing users to configure, set, and test ADAM-6100 modules through Ethernet.
Specification
| Part Number | ADAM-6160EI-AE | |
|---|---|---|
| Analog Input | Channels | – |
| Resolution | – | |
| Voltage Input | – | |
| Sampling Rate | – | |
| Direct Sensor Input | – | |
| Current Input | – | |
| Digital Input/Output | Input Channels | – |
| Output Channels | 6-ch power relay | |
| Display | Interface | 10/100 Mbps Ethernet |
| Support Protocol | EtherNet/IP | |
| General | Connectors | 2 x RJ-45 LAN (Daisy Chain), Plug-in screw terminal block (I/O and power) |
| Isolation Protection | 2,500 VDC | |