ADAM-6542

Ethernet to Single Stand WDM Fiber Optic Converter
  • Supports 1-port 100 Mbps single strand fi ber optics
  • Supports 10 ~30 VDC power input
  • Easily to mounted on a DIN-rail, panel or piggyback
  • Provides 100Base-FX WDM single strand fi ber
  • Supports MDI/MDIX auto crossover.
  • Embedded with a switch controller, supports auto-negotiation.
  • Embedded with the memory buffer, supports store and forward transmission.
Indent
Get Quote

Introduction

The ADAM-6542 adopts WDM technology that increases the information carrying capacity of fiber via multiplex transmit and receive signals at different wavelengths on the single strand cable. The WDM technology is implemented in couples. One site is installed ADAM-6542/W15 which transmit channel is 1550nm and receive channel is 1310nm. The other site is installed ADAM6542/W13 which transmit channel is 1310nm and receive channel is 1550nm. Both transmit and receive channels of ADAM-6542/W15 and ADAM-6542/W13 are multiplexed to a single strand cable. You can save half cabling cost when you use ADAM-6542/W15 and ADAM-6542/W13 instead of your original dual fiber converter.

Specification

Part NumberADAM-6542/W13-AEADAM-6542/W15-AE
GeneralEthernet Connectors1 x RJ-45
1 x SC type fiber connector
1 x RJ-45
1 x SC type fiber connector
MountingDIN 35 rail,
Wall, Stack
DIN 35 rail,
Wall, Stack
I/OTransmission DistanceEthernet : Up to 100 m
Fiber: Up to 20 km
Ethernet : Up to 100 m
Fiber: Up to 20 km
Transmission SpeedUP to 100 MbpsUP to 100 Mbps
Operating SystemOperating Temperature0 ~ 60°C (32 ~ 140°F)
Stack: 0~ 50°C (32 ~ 122°F)
0 ~ 60°C (32 ~ 140°F)
Stack: 0~ 50°C (32 ~ 122°F)
Power SupplyPower Connector2-pin removable
screw terminal
2-pin removable
screw terminal
Power Input1 x Unregulated
10 ~ 30 VDC
1 x Unregulated
10 ~ 30 VDC
Accessory
Part NumberDescription
PWR-242-AEDIN-rail Power Supply
PWR-243-AEPanel Mount Power Supply
PWR-244-AEPanel Mount Power Supply
WhatsApp chat Chat WhatsApp