ADAM-6015

7-ch Isolated RTD Input Modbus TCP Module
  • I/O Type: 7 RTD
  • 10/100Based-T Ethernet
  • Supports multi-channel/multi-range
  • Pt 100/1000, Ni, Balco 500
  • Wiring burn-out detect function
Indent
Get Quote

Introduction

The ADAM-6015 7-channel RTD input module accepts a wide range of RTD sensor types, including Pt100, Pt1000, Ni50, Ni508, and Balco 500 series. Multi input ranges are allowed in one module, creating a cost-effective solution. Most important of all, the ADAM-6015 supports open wiring diagnostic function which warns operators when the sensor wire has been broken. It specifically aims at building and factory temperature monitoring applications.

Specification

 

ADAM-6015-BE
DisplayLED IndicatorsStatus, Comm, Link, Speed
Power SupplyPower Requirement10~30 VDC
Analog InputChannels7 (2 or 3-wired)
Burn-out DetectionYes
Channel Independent ConfigurationYes
Sampling Rates10 samples/second
Resolution16-bit
Input Impedance>10 MOhm
Span Drift±25 ppm/°C
Zero Drift±6 µV/°C
CMR @ 50/60 Hz90 dB
NMR @ 50/60 Hz60 dB
GeneralWatchdog TimerSystem (1.6 second) & Communication (programmable)
Connector1 x RJ-45 (LAN) & 2 x plug-in terminal block (I/O and power)
Temperature (Operating)-10~70 °C (14~158 °F)
Humidity20~95 %RH
Temperature (Storage)-20~80 °C (-4~176 °F)
Interface10/100Base-T(X)
Peer-to-PeerYes
GCLYes
Isolation Protection2000 VDC
Communication ProtocolModbus/TCP, TCP/IP, UDP, and HTTP
Communication SpeedEthernet: 10/100Mbps
Comm. DistanceEthernet: 100 m
WhatsApp chat Chat WhatsApp