
48-ch Digital I/O USB Module
The USB-4700 series consists of true Plug & Play data acquisition devices. No more opening up your computer chassis to install boards-just plug in the module, then get the data. It’s easy and efficient. USB-4751/4751L is a 48/24-bit digital I/O module for the USB bus. Its 48/24 bits are divided into six/three 8-bit I/O ports and users can configure each port as input or output via software. USB-4751/USB-4751L also provides one event counter and three 16-bit timers, which can be cascaded to become a 32-bit timer.
Main Features :
- Compatible with USB 1.1/2.0
- Portable
- Bus-powered
- 48 TTL digital I/O lines
- Emulates mode 0 of 8255 PPI
- Buffered circuits for higher driving capacity than 8255
- Interrupt handling
- Timer/Counter interrupt capability
- Supports both dry and wet contact
- 50-pin Opto-22 compatible box header
- Suitable for DIN-rail mounting
- One lockable USB cable for secure connection included
Price : This e-mail address is being protected from spambots, you need JavaScript enabled to view it
Specifications | ||
| Digital Input | Channels | 48/24 (shared with output) |
| Compatibility | 5 V/TTL | |
| Input Voltage | Logic 0: 0.8 V max. Logic 1: 2 V min. | |
| Digital Output | Channels | 48/24 (shared with input) |
| Compatibility | 5 V/TTL | |
| Output Voltage | Logic 0: 0.5 V max. Logic 1: 3.8 V min. | |
| Output Capability | Sink: 12 mA @ 0.5 V Source: 12 mA @ 3.8 V for single Channels 5 mA @ 3.8 V for all Channels in High status | |
| Counter/Timer | Channels | 2 |
| Resolution | 32-bit | |
| Max. Input Frequency | 8 MHz | |
| General | Bus Type | USB 1.1/2.0 |
| I/O Connectors | 50-pin IDC male connectors, pin assignments are fully compatible with Opto-22 I/O module racks | |
| Dimensions (L x W x H) | 132 x 80 x 32 mm | |
| Power Consumption | Typical: 200 mA @ 5 V Max.: 500 mA @ 5 V | |
| Operating Temperature | 0 ~ 60° C (32 ~ 140° F) (refer to IEC 68-2-1, 2) | |
| Storage Temperature | -20 ~ 70° C (-4 ~ 158° F) | |
| Storage Humidity | 5 ~ 95% RH, non-condensing (refer to IEC 68-2-3) | |
| < Prev | Next > |
|---|